Integrated Robot Controller & Drivers
MRCU Series
Online Manual

WM-0006-3E

Thank you for purchasing an Oriental Motor product. This manual describes product handling procedures and safety precautions. Please read the manual thoroughly to ensure safe operation.

• Use the product correctly after thoroughly reading the section Safety precautions. In addition, be sure to observe the contents described in warning, caution, and note in this manual.

• This manual mainly describes the hardware of the product. For the control method, parameters, I/O signals, etc., refer to the “MRC01 User Manual.”

• Unauthorized reproduction or copying of all or part of this manual is prohibited.

• Oriental Motor shall not be liable whatsoever for any problems relating to industrial property rights arising from use of any information, circuit, equipment or device provided or referenced in this manual.

• Characteristics, specifications and dimensions are subject to change without notice.

• While we make every effort to offer accurate information in the manual, we welcome your input. Should you find unclear descriptions, errors or omissions, please contact the nearest office.

• EtherNet/IP™ is a trademark of ODVA (Open DeviceNet Vendor Association).

• The following is a registered trademark or trademark of Oriental Motor Co., Ltd., in Japan and other countries.



• Other product names and company names mentioned in this manual may be registered trademarks or trademarks of their respective companies and are hereby acknowledged. The third-party products mentioned in this manual are recommended products, and references to their names shall not be construed as any form of performance guarantee. Oriental Motor Co., Ltd. is not liable whatsoever for the performance of these third-party products.

© Copyright ORIENTAL MOTOR CO., LTD. 2025